Harris® 1/8" Acid Core Tin Lead Antimony Leaded Solder 5 lb Spool

Item Details

Harris� 1/8"""" Dia 40/60 Acid Core Wire Solder comes in a 5 lb spool. Formulated for general purpose soldering such as radiator repairs, galvanized gutters, stained glass, sheet metal and other non-electrical applications.

Features

• For soldering ferrous and non-ferrous base metals, except aluminum
• Contains an activated flux core and a separate flux application is typically not required
• Primarily used for small connections, due to limited amount of flux available
• Heat sources include soldering guns, irons and air-fuel torches
• Not recommended for high stress or vibration joints in the cooling industry due to lack of sufficient elongation properties
• Not recommended for electrical or electronic applications due to corrosive properties of the flux residue
• Not for use with plumbing and potable water system applications
• Meets ASTM B-32 Specification, Alloy Grade Sn40A WOAP2

Applications

• Tin-lead solder contains an acid core center
• It is used solder many ferrous and non-ferrous base metals, except aluminum
• The solder contains an activated flux core and a separate flux application is typically not required
• Cored solder is used for small connections, as there is a limited amount of flux available to protect the surface
• Heat sources include soldering guns, irons, and air-fuel torches
• Tin-lead solder is not recommended in high stress or vibration joints in the cooling industry due to lack of sufficient elongation properties
• Acid core solder is not recommended for electrical or electronic application due to corrosive properties of the flux residue.

Specifications

• ASTM B32 Alloy Grade Sn 40A Type WOAP-2

Caution

• WARNING: PROTECT yourself and others. Read and understand this information.
• FUMES AND GASES can be hazardous to your health.
• HEAT RAYS (infrared radiation) from flames or hot metal can injure eyes.
• Before use, read and understand the manufacturer's instructions Safety Data Sheets (SDS), and y our employer's safety practices. Keep your head out of fumes.
• Use enough ventilation, exhaust at the flame, or heat source, to keep fumes and gases from y our breathing zone and the general area.
• Wear correct eye, ear, and body protection.
• See American National Standard Z49.1, Safety in Welding, Cutting, and Allied Processes, published by the American Welding Society, 8669 Doral Blvd., Doral, Florida 33166
• OSHA Safety and Health Standards, available from the U.S. Government Office, Washington, DC 20402.

Warning

• WARNING: This product can expose you to chemicals including Carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.