RADNOR .030 - .078" X 3.11" 0.5" Bore 23 Series Nozzle For RADNOR Pro 250/Tweco® No. 2, 4/400 MIG Guns

Item Details

Features

• Easy identification - part no rolled stamped on the outside surface
• 3-piece design - does not require an additional insulator
• Nozzle housing - cut and formed from 122 dhp copper alloy tubing
• Nozzle insulator - made from g7 silicone material, providing the electrical insulation needed from the gas diffuser
• Nozzle Insert - machined from a solid brass allow and machining the internal threads to match the conductor tube OD threads
• 3-piece nozzle design, includes: Nozzle Housing - Cut and Formed from 122 DHP copper alloy tubing
• Recessed Tips are generally used for higher heat applications where longer electrical stick-out is required, or in cases where the nozzle may touch the work piece (tack, spot, and stitch)
• Flush Tips are generally used where a shorter electrical stick-out is used sometimes resulting in shorter/tighter arc lengths, This brings the tip closer to the work piece
• Protruding Tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint
• However the down side to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace
• Thread-on

Applications

• Used in heavy duty welding application up to 450 Amp

Specifications

• Consumables Type Nozzle
• MIG Gun Model RADNOR Pro 250
• MIG Wire Size .030 - .078"
• Length 3.11"
• Bore 0.5"
• Series 23
• Tip Relationship Flush